一类Riemann-Hilbert边值逆问题

给出解析函数的一类R iem ann-H ilbert边值逆问题的数学提法,依据解析函数R iem ann-H ilbert边值问题的经典理论,讨论了此边值问题的可解性,给出了该边值问题的可解条件和解的表示式.     

制备条件对稀土掺杂TiO2物理性质和光催化降解吡唑草胺性能的影响

多相光催化是一种非常有效的降解各种水污染物的方法.本文以稀土(镝和镨)掺杂的TiO2为光催化剂,考察了制备条件对其物理性质和光催化性能的影响.采用溶胶-凝胶法和不同条件(反应温度450,550,650oC;反应时间4,8,12 h)的固态反应法制备了TiO2样品.运用X射线衍射分析了该样品的晶相,发现只存在锐钛矿相,并得到Raman光谱的证实.同时采用扫描电镜观察了样品的结构和粒径;以BET法计算了其比表面积;运用紫外-可见光漫反射光谱测得了样品的带隙能量.通过测量紫外光照射下常用除草剂吡唑草胺的降解速率评价了样品的光催化活性,反应过程中吡唑草胺的浓度用高效液相色谱分析.结果表明,稀土掺杂使得TiO2吸收边红移,并提高了其光催化活性;制备时最优的固态反应条件为550oC反应8 h.     

温和条件下金属双氮杂环卡宾配合物催化CO2直接转化为炔酸的高效均相羧化反应

近年来,催化CO2合成精细化学品的研究备受关注。本研究在温和条件下利用金属双氮杂环卡宾催化剂实现CO2与末端炔烃的直接羧化反应,并提出合理的催化机理。首先,合成制备了铜基、银基两种金属双氮杂环卡宾催化剂,实验证明银双氮杂环卡宾配合物具有较好催化活性。通过改变环境条件和底物种类,对反应条件及催化剂底物适应性进行了探究,利用核磁共振谱仪表征产物分子结构并计算直接羧化反应的催化产率。结果表明,适宜催化条件为:1.2eq Cs2CO3作为添加剂、1大气压、室温、无水溶剂和1(mmol)%催化剂用量。银基金属催化剂活性较铜基催化剂高并具有广泛的底物适应性,对苯乙炔的催化产率高达93%;对乙炔气体同样具有良好的催化活性。此类催化剂具有优良的催化活性,能催化合成丙炔酸等重要医药中间体,在工业应用上具有极大潜力和广阔前景。     

不同孪晶界密度银纳米线拉伸形变行为的分子动力学模拟

采用分子动力学方法模拟了不同孪晶界密度银纳米线的拉伸形变行为, 分析了孪晶界密度对多晶银纳米线屈服强度、弹性模量和塑性变形机理的影响. 在弹性形变区域, 孪晶界的存在对杨氏模量变化的作用不明显. 在塑性形变阶段, 首先从表面边缘开始产生位错成核, 然后延伸并受阻于孪晶界. 在进一步拉伸载荷作用下, 孪晶界将作为位错源产生新的位错. 模拟结果表明, 银纳米线的强度与孪晶界和晶粒的尺寸有关. 孪晶界密度较小(即晶粒的长径比大于1)时, 此纳米线的屈服应力比单晶纳米线还要小, 只有当孪晶界密度较大时(即晶粒的长径比小于1), 孪晶界使得纳米线得到强化. 综合分析了孪晶界和晶粒尺寸对银纳米线的影响, 为构建高强度金属纳米线打下基础. 最后讨论了温度和拉伸速度对孪晶纳米线屈服应力所产生的影响, 随着温度的升高, 孪晶纳米线与单晶纳米线的屈服应力差先升高后趋于稳定; 当拉伸速度逐渐增大, 孪晶纳米线与单晶纳米线的屈服应力差先稳定后增大.     

The tribological performance of fullerene‐like hydrogenated carbon films under ionic liquid lubrication

Fullerene‐like hydrogenated carbon films were deposited on Si substrate by plasma‐enhanced chemical vapor deposition. The microstructures of films were characterized by high‐resolution transmission electron microscopy and Raman spectrum. The tribological performance of films was tested by reciprocating ball‐on‐disc tester under 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ionic liquid. The surface morphology and chemical composition of wear tracks and wear rates were investigated by optical microscope, X‐ray photoelectron spectroscopy, and 3D surface profiler. The results indicated that the film with a typical fullerene‐like structure embedded into the amorphous sp² and sp³ carbon networks could be prepared successfully, and the film shows a higher hardness (26.7 GPa) and elastic recovery (89.9%) compared with the amorphous carbon film. Furthermore, the film shows a lower friction coefficient at low contact load and friction frequency, and excellent wear‐resistance performance at high load and frequency under ionic liquid lubrication. Meanwhile, the wear life of fullerene‐like hydrogenated carbon films could be improved significantly using ionic liquid as a lubrication material. Copyright © 2015 John Wiley & Sons, Ltd.     

MOLSIM: A modular molecular simulation software

The modular software MOLSIM for all‐atom molecular and coarse‐grained simulations is presented with focus on the underlying concepts used. The software possesses four unique features: (1) it is an integrated software for molecular dynamic, Monte Carlo, and Brownian dynamics simulations; (2) simulated objects are constructed in a hierarchical fashion representing atoms, rigid molecules and colloids, flexible chains, hierarchical polymers, and cross‐linked networks; (3) long‐range interactions involving charges, dipoles and/or anisotropic dipole polarizabilities are handled either with the standard Ewald sum, the smooth particle mesh Ewald sum, or the reaction‐field technique; (4) statistical uncertainties are provided for all calculated observables. In addition, MOLSIM supports various statistical ensembles, and several types of simulation cells and boundary conditions are available. Intermolecular interactions comprise tabulated pairwise potentials for speed and uniformity and many‐body interactions involve anisotropic polarizabilities. Intramolecular interactions include bond, angle, and crosslink potentials. A very large set of analyses of static and dynamic properties is provided. The capability of MOLSIM can be extended by user‐providing routines controlling, for example, start conditions, intermolecular potentials, and analyses. An extensive set of case studies in the field of soft matter is presented covering colloids, polymers, and crosslinked networks. © 2015 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Effect of a plant fortifier (Boundary) on pests and predators of greenhouse vegetable crops

Boundary, a plant fortifier composed of extracts of Sophora flavescens Aiton and brown algae, was tested for control of the leaf miner Tuta absoluta (Meyrick) on tomato (three trials) and of the red spider mite Tetranychus urticae Koch on eggplant (one trial) and for side effects on the whitefly predator Macrolophus pygmaeus (Kambur) (two trials) on tomato and on the thrips predators Orius laevigatus (Fieber) and Amblyseius swirskii Athias-Henriot (two trials) on pepper, all in cold greenhouses in South Italy. Control rates for T. absoluta were moderate (40–70%) in the autumn crop but very high and comparable to those for emamectin benzoate in the spring crops (96–100%). Boundary compared well with abamectin against T. urticae, with near complete control. M. pygmaeus was moderately injured in late autumn, but not in early autumn. At the tested application rate and predator population density Boundary was safe for O. laevigatus and A. swirskii.     

Ferric Phosphate Hydroxide Microstructures Affect Their Magnetic Properties

Uniformly sized and shape-controlled nanoparticles are important due to their applications in catalysis, electrochemistry, ion exchange, molecular adsorption, and electronics. Several ferric phosphate hydroxide (Fe₄(OH)₃(PO₄)₃) microstructures were successfully prepared under hydrothermal conditions. Using controlled variations in the reaction conditions, such as reaction time, temperature, and amount of hexadecyltrimethylammonium bromide (CTAB), the crystals can be grown as almost perfect hyperbranched microcrystals at 180 °C (without CTAB) or relatively monodisperse particles at 220 °C (with CTAB). The large hyperbranched structure of Fe₄(OH)₃(PO₄)₃ with a size of ∼19 μm forms with the “fractal growth rule” and shows many branches. More importantly, the magnetic properties of these materials are directly correlated to their size and micro/nanostructure morphology. Interestingly, the blocking temperature (T_B) shows a dependence on size and shape, and a smaller size resulted in a lower T_B. These crystals are good examples that prove that physical and chemical properties of nano/microstructured materials are related to their structures, and the precise control of the morphology of such functional materials could allow for the control of their performance.     

Raney Ni催化生物基糠醛还原胺化合成糠胺

生物质衍生物糠醛还原胺化是合成糠胺的一种有效方法。本文以糠醛为原料、氨水为氨源,使用商业Raney Ni催化糠醛还原胺化合成糠胺,考察了氢压、温度、n(糠醛)/n(氨水)、溶剂、催化剂用量等条件对反应的影响。实验结果表明：在1,4-二氧六环溶剂中,0.03 g Raney Ni、n(糠醛)/n(氨水)=1/2、130 ℃、2.0 MPa H₂条件下反应3 h,糠醛转化率100%,糠胺选择性96.3%。与传统方法相比,该工艺实现了非贵金属催化剂作用下高选择性反应,具有操作简单、低成本、收率高等优点。      

Solvent-free 1,6-conjugate arylation of para-quinone methides: A greener approach to unsymmetrical triarylmethanes

A highly efficient arylation of para-quinone methides (p-QMs) with N,N-dimethylaniline under solvent free condition has been developed, which proceeded via a para-toluenesulfonic acid (TsOH)-promoted 1,6-conjugated addition pathway. This methodology provided a green and sustainable methodology to construct various novel unsymmetrical triarylmethanes (TAMs) with the advantages of good functional group tolerance, scalability, and regioselectivity.